How do I setup MVRP (Multiple VLAN Registration Protocol) & GVRP (Generic VLAN Registration Protocol) on the NVT Phybridge FLEX24-10G (NV-FLX-024-10G) switch?

MVRP and GVRP are protocols used to distribute VLANs from one switch to another. The Multiple Registration Protocol (MVRP) is the successor to the GARP VLAN Registration Protocol (GVRP).
From a basic level, MVRP allows network devices such as switches and bridges to exchange information with each other. Information commonly exchanged via MVRP is VLAN identities and multicast group memberships.

Enabling GVRP Globally
GVRP is enabled globally from Global Configuration mode as follows:

FLEX24-10G# configure terminal
FLEX24-10G(config)# gvrp
FLEX24-10G(config)# gvrp time join-time 2 leave-time 100 leave-all-time 3000
FLEX24-10G(config)# gvrp max-vlans 100
%% Failed to configure the number of VLANs managed by GVRP.
% (The GARP application is currently enabled - disable it in order to configure its
parameters.)
FLEX24-10G(config)# no gvrp
FLEX24-10G(config)# gvrp max-vlans 100
FLEX24-10G(config)# gvrp
FLEX24-10G(config)# end
FLEX24-10G# copy running-config startup-config
Building configuration...
% Saving 2018 bytes to flash:startup-config
FLEX24-10G#

Enabling MVRP Globally
MVRP is enabled globally from Global Configuration mode as follows:

FLEX24-10G# configure terminal
FLEX24-10G(config)# mvrp
FLEX24-10G(config)# mvrp managed vlan 10,20,30
FLEX24-10G(config)# end
FLEX24-10G# copy running-config startup-config
Building configuration...
% Saving 2070 bytes to flash:startup-config
FLEX24-10G#

Refer to the Admin Guide for all the advanced settings available in the switch. You’ll find additional resources like the Datasheet, Admin Guide, A&E spec sheet, etc on the product page here.  

For more assistance, 

Create a support ticket here.  Reach us via phone:   1-888-901-3633 [phone]

Reach via chat on our website. Reach us via email here Click here for the Warranty information