The three methods of accessing the switch’s command line interface (CLI) on the FLEX24-10G are via SSH, Telnet, and serial console. SSH and Telnet are enabled by default and do not require any additional configuration. The default address of VLAN 1 is 192.168.100.1 and the CLI can be accessed from any of the FLEX24-10G’s interfaces. The serial console interface uses a speed of 115200 bits per second.
Refer to the Admin Guide for all the advanced settings available in the switch. You’ll find additional resources like the Datasheet, Admin Guide, A&E spec sheet, etc on the product page here.
For more assistance,
|
Comments
0 comments
Please sign in to leave a comment.