How do I setup NTP (Network Time Protocol) on the NVT Phybridge PoLRE24/48 (NV-PL-024/NV-PL-048) switch?

NTP allows the NVT Phybridge PoLRE24/48 to synchronize its internal clock with an external/internal NTP server. It is often desirable to have every NTP-compatible device in a network to be synchronized to the same NTP server. With every device in the network having its clocks synchronized with every other device, this greatly speeds up the troubleshooting process when timestamps from several devices must be examined together.
The PoLRE24/48 switch can only be configured as an NTP client and cannot act as a standalone server.

Configuration 

pal-service-ntp {start|stop|restart|enable|disable}
pal-service-ntp {add|remove} <IP>

Refer to the Video tutorial to know more about configuring the NTP server on the switch.

Refer to the Admin Guide for all the advanced settings available in the switch. You’ll find additional resources like the Datasheet, Admin Guide, A&E spec sheet, etc on the product page here.  

For more assistance, 

Create a support ticket here.  Reach us via phone:   1-888-901-3633 [phone]

Reach via chat on our website. Reach us via email here Click here for the Warranty information