What do the LEDs on the 1701+ Base and Link (NV-EC1701PLS-BSE and NV-EC1701PLS-LK) mean?

1701+ Base Indicators as below, 

A. Uplink
           (1) The Ethernet RJ45 connector shall have two LEDs to indicate network connection status:
                10/100 LINK/ACT (LEFT - amber) and 1000 LINK/ACT (RIGHT - green).
           (2) The 10/100 LINK/ACT LED indicates the following: Off – no connection at 10 or 100 Mbps.
                On – connected at 10 or 100mbps. Blinking – network activity at 10 or 100 Mbps.

           (3) The 1000 LINK/ACT LED indicates the following: Off – no connection at 1000 Mbps. On –
                connected at 1000mbps. Blinking – network activity at 1000 Mbps.
B. BNC Downlink
           (1) The downlink port shall have two LEDs to indicate power and network status: PWR (LEFT
                 – blue) and LINK/JOIN (Right – green)
           (2) The PWR LED indicates the following: Off – unit is unpowered. On – unit is powered.
           (3) The LINK/JOIN LED indicates the following: Off – no HPAV link. On – connected via HPAV.                            Blinking – network activity OR unit is in joining mode.

1701+ Link Indicators as below,

A. Downlink
          (1) The Ethernet RJ45 connector shall have two LEDs to indicate network connection status:
               10/100 LINK/ACT (LEFT - amber) and 1000 LINK/ACT (RIGHT - green).
          (2) The 10/100 LINK/ACT LED indicates the following: Off – no connection at 10 or 100 Mbps.
               On – connected at 10 or 100mbps. Blinking – network activity at 10 or 100 Mbps.
          (3) The 1000 LINK/ACT LED indicates the following: Off – no connection at 1000 Mbps.
               On – connected at 1000mbps. Blinking – network activity at 1000 Mbps.
B. BNC Uplink
          (1) The downlink port shall have two LEDs to indicate power and network status: PWR (LEFT
               – blue) and LINK/JOIN (Right – green)
          (2) The PWR LED indicates the following: Off – unit is unpowered. On – unit is powered.
          (3) The LINK/JOIN LED indicates the following: Off – no HPAV link. On – connected via HPAV.                           Blinking – network activity OR unit is in joining mode.

You’ll find additional resources like the Datasheet, Admin Guide, A&E spec sheet, etc on the product page here.  

For more assistance, 

Create a support ticket here.  Reach us via phone:   1-888-901-3633 [phone]

Reach via chat on our website. Reach us via email here Click here for the Warranty information