How do I configure multicast VLAN (Virtual Local Area Network) registration (MVR) on the NVT Phybridge FLEX24-10G (NV-FLX-024-10G) switch?

September 28, 2022 11:50
Updated

The multicast VLAN when created becomes the sole VLAN for IPTV multicast traffic. MVR-enabled switches will designate their interfaces as either an Inactive interface, a Source interface, or a Receiver interface.

By default, MVR is not enabled on the FLEX24-10G. MVR is enabled from Global Configuration as follows:

FLEX24-10G# configure terminal
FLEX24-10G(config)# mvr
FLEX24-10G(config)# end
FLEX24-10G# copy running-config startup-config
Building configuration...
% Saving 3283 bytes to flash:startup-config
FLEX24-10G#

Refer to the Admin Guide for all the advanced settings available in the switch. You’ll find additional resources like the Datasheet, Admin Guide, A&E spec sheet, etc on the product page here.

For more assistance,

Create a support ticket here.
Reach us via phone:
- 1-888-901-3633
- +44 (0) 20 8977 6614

Reach via chat on our website.
Reach us via email here
Click here for the Warranty information