LLDP-MED is an extension of LLDP designed to operate between endpoint devices (most commonly IP phones) and network connectivity devices (switches). LLDP-MED endpoints, such as IP phones, determine the capabilities of a connected device, in this case, the FLEX24-10G, and whether those capabilities are enabled.
LLDP and LLDP-MED cannot be enabled simultaneously on a switch interface. LLDP-MED conversations always originate from the endpoint device. The FLEX24-10G will initially only send LLDP frames until it receives LLDP-MED frames from the endpoint.
Example of Creating a Policy and Mapping a Policy to an Interface
FLEX24-10G# configure terminal
FLEX24-10G(config)# lldp med media-vlan-policy 0 voice tagged 10 l2-priority 5 dscp 46
FLEX24-10G(config)# interface GigabitEthernet 1/1
FLEX24-10G(config-if)# lldp med media-vlan policy-list 0
FLEX24-10G(config-if)# end
FLEX24-10G# copy running-config startup-config
FLEX24-10G#
Refer to the Admin Guide for all the advanced settings available in the switch. You’ll find additional resources like the Datasheet, Admin Guide, A&E spec sheet, etc on the product page here.
For more assistance,
|
Comments
0 comments
Please sign in to leave a comment.