How do I setup NTP (Network Time Protocol) on the NVT Phybridge CLEER24-10G (NV-CLR-024-10G) switch?

NTP allows the CLEER24-10G to synchronize its internal clock with an external/internal NTP server. It is often desirable to have every NTP-compatible device in a network to be synchronized to the same NTP server. With every device in the network having its clocks synchronized with every other device, this greatly speeds up the troubleshooting process when timestamps from several devices must be examined together.
The CLEER24-10G can only be configured as an NTP client and cannot act as a standalone server.

Configuration 

CLEER24-10G# configure terminal
CLEER24-10G(config)# ntp
CLEER24-10G(config)# ntp server 1 ip-address 192.168.100.100
CLEER24-10G(config)# end
CLEER24-10G# copy running-config startup-config
Building configuration...
% Saving 2285 bytes to flash:startup-config
CLEER24-10G#

Refer to the Video Tutorial to know more about the configuration of NTP servers on the switch.

Refer to the Admin Guide for all the advanced settings available in the switch. You’ll find additional resources like the Datasheet, Admin Guide, A&E spec sheet, etc on the product page here.  

For more assistance, 

Create a support ticket here.  Reach us via phone:   1-888-901-3633 [phone]

Reach via chat on our website. Reach us via email here Click here for the Warranty information