How do I configure SNMP (Simple Network Management Protocol) in the NVT Phybridge CLEER24-10G (NV-CLR-024-10G) switch?

The Simple Network Management Protocol (SNMP) is an internet standard used to collect various information from network devices which is sent to be analyzed by an SNMP manager. An SNMP manager is a centralized software application that can be used to monitor all devices on a network running SNMP.

There are three versions of SNMP, with SNMPv3 being the latest. The CLEER24-10G can run all three versions of SNMP at once.

CLEER24-10G# configure terminal
CLEER24-10G(config)# snmp-server
CLEER24-10G(config)# snmp-server engine-id local 1234567890

CLEER24-10G(config)# snmp-server John 1234567890 sha supersecurepassword priv des evermoresecurepassword
CLEER24-10G(config)# snmp-server security-to-group model v3 name John group IT
CLEER24-10G(config)# end
CLEER24-10G# copy running-config startup-config
Building configuration...
% Saving 3466 bytes to flash:startup-config
CLEER24-10G#

Refer to the Video tutorial to more know about SNMP configuration and usage on the 10G switches.

Refer to the Admin Guide for all the advanced settings available in the switch. You’ll find additional resources like the Datasheet, Admin Guide, A&E spec sheet, etc on the product page here.  

For more assistance, 

Create a support ticket here.  Reach us via phone:   1-888-901-3633 [phone]

Reach via chat on our website. Reach us via email here Click here for the Warranty information