How do I know if my cabling will be supported by the NVT Phybridge FLEX24 (NV-FLX-024)?

The switch is designed to work with UTP cabling. We recommend the use of Cat5 or better cabling for the installation of the NVT Phybridge FLEX24. However, this does not mean the switch will not work on cabling that does not meet CAT5 specifications.

Cable with an impedance of 100Ohms and a minimum twists per inch is required. Please note that this will not have the same results as a CAT-rated cable.

You’ll find additional resources like the Datasheet, Admin Guide, A&E spec sheet, etc on the product page here.

For more assistance, 

Create a support ticket here.  Reach us via phone:   1-888-901-3633 [phone]

Reach via chat on our website. Reach us via email here Click here for the Warranty information